Modifications:IBM Model M:Nut and Bolt Mod

From GeekHackWiki
Revision as of 21:47, 30 August 2012 by Rknize (talk | contribs) (Created page with "This articles covers the so-called "nut and bolt mod" or "bolt mod" for the IBM Model M keyboard. It entails replacing the plastic rivets that hold the keyboard mechanism tog...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This articles covers the so-called "nut and bolt mod" or "bolt mod" for the IBM Model M keyboard. It entails replacing the plastic rivets that hold the keyboard mechanism together with machine screws and nuts. You will need

Tools

  • Flat head screw driver
  • Small Philips screw driver
  • 5.5mm or 7/32" nut driver
  • Sharp chisel
  • Drill press, hand drill, or Dremel
  • 1/16" (#52 or metric 16) drill bit
  • M2.0 x .40 tap (optional)

Hardware

  • 87 x M2 Screw, 8mm Length, .4mm Pitch (McMaster Carr 92005A029)
  • 87 x M2 Nut, .4mm Pitch (McMaster Carr 90592A004)
  • 87 x M2 Washer (McMaster Carr 93475A196)

Dissassembly